SSC JE Syllabus, Exam Pattern, Eligibility Criteria, Question Papers, Results, Answer Key

SSC JE Syllabus, Exam Pattern, Eligibility Criteria, Question Papers, Results, Answer Key:

SSC JE Syllabus

SSC JE Syllabus, SSC JE Syllabus Paper 1, 2: The standard of the questions in E ngi neeri ng subjects will be approximately of the level of Diploma in E ngineering (Civil/Mechanical/ Electrical). The details of the syllabus are given below:

Paper 1 SSC JE Syllabus

  •  General Intelligence & Reasoning: The Syllabus for General Intelligence would include questions of both verbal and non-verbal The test may include questions on analogies, similarities, differences, space visualization, problem solving, analysis, judgment, decision making, visual memory, discrimination, observation, relationship concepts, arithmetical reasoning, verbal and figure classification, arithmetical number series, etc. The test will also include questions designed to test the candidate’s abilities to deal with abstract ideas and symbols and their relationships, arithmetical computations and other analytical functions.
  • General Awareness: Questions will be aimed at testing the candidate’s general awareness of the environment around him/her and its application to Questions will also be designed to test knowledge of current events and of such matters of everyday observations and experience in their scientific aspect as may be expected of any educated person. The test will also include questions relating to India and its neighbouring countries especially pertaining to History, Culture, Geography, Econom ic Scene, General Polity and Scientific Research, etc. These questions will be such that they do not require a special study of any discipline.
  • General Engineering: Civil & Structural, Electrical and Mechanical:
    •  Part-A (Civil Engineering): Building Materials, Estimating, Costing and Valuation, Surveying, Soil Mechanics, Hydraulics, Irrigation E ngineering, Transportation Engineering, Environmental E ngineering.Structural E ngineering: Theory of Structures, Concrete Technology, RCC Design, Steel Design.
    • Part-B (Electrical Engineering):Basic concepts, Circuit law, Magnetic Circuit, AC Fundamentals, Measurement and Measuring instruments, Electrical Machines, Fractional Kilowatt Motors and single phase induction Motors, Synchronous Machines, Generation, Transmission and Distribution, Estimation and Costing, Utilization and Electrical Energy, Basic Electronics.
    • Part-C Mechanical Engineering:Theory of Machines and Machine Design, E ngineering Mechanics and Strength of Materials, Properties of Pure Substances, 1st Law of Thermodynamics, 2 nd Law of Thermodynamics, Air standard Cycles for IC Engines, IC Engine Performance, IC E ngines Combustio n, IC Engine Cooling & Lubrication, Rankine cycle of System, Boilers, Classification, Specification, Fitting & Accessories, Air Comp ressors & their cycles, Refrigeration cycles, Principle of Refrigeration Plant, Nozzles & Steam Turbines. Properties & Classification of Fluids, Fluid Statics, Measurement of Fluid Pressure, Fluid kinematics, Dynamics of Ideal fluids, Measurement of Flow rate, basic principles, Hydraulic Turbines, Centrifugal Pumps, Classification of steel.

Paper 2 SSC JE Syllabus

  • Part-A (Civil & Structural Engineering):

    • Building Materials: Physical and Chemical p roperties, classification, standard tests, uses and manufacture/quarrying of materials e.g. building stones, silicate based materials, cement (Portland), asbestos products, timber and wood based p roducts, laminates, bituminous materials, paints, varnishes.
    • Estimating. Costing and Valuation: estimate, glossary of technical terms, analysis of rates, methods and unit of measurement, Items of work – earthwork, Brick work (Modular & Traditional bricks), RCC work, Shuttering, Timber work, Painting, Flooring, Plastering, Boundary wall, Brick building, Water Tank, Septic tank, Bar bending schedule, Centre line method, Mid-section formula, Trapezodial formula, Simpson’s rule, Cost estimate of Septic tank, flexible pavements, Tube well, isolates and combined footings, Steel Truss, Piles and pile-caps. Valuation – Value and cost, scrap value, salvage value, assessed value, sinking fund, depreciation and obsolescence, methods of valuation.
    • Surveying: Principles of surveying, measurement of distance, chain surveying, working of p rismatic compass, compass traversing, bearings, local attraction, plane table surveying, theodolite traversing, adjustment of theodolite, Levelling, Definition of terms used in levelling, contouring, curvature and refraction corrections, temporary and permanent adjustments of dumpy level, methods of contouring, uses of contour map, tachometric survey, curve setting, earth work calculation, advanced surveying equipment
    • Soil Mechanics: Origin of soil, phase diagram, Definitions-void ratio, porosity, degree of saturation, water content, specific gravity of soil grains, unit weights, density index and interrelationship of different parameters, Grain size distribution curves and their uses Index p roperties of soils, Atterberg”s limits, ISi soil classification and plasticity chart Permeability of soil, coefficient of permeability, determination of coefficient of permeability, U nconfined and confined aquifers, effective stress, quick sand, consolidation of soils, Principles of consolidation, degree of consolidation, pre-consolidation p ressure, normally consolidated soil, e­ log p curve, computation of ultimate settlement Shear strength of soils, direct shear test, Vane shear test, Triaxial test Soil compaction, Laboratory compaction test, Maximum dry density and optimum moisture content, earth pressure theories, active and passive earth pressures, Bearing capacity of soils, plate load test, standard penetration test
    • Hydraulics: Fluid properties, hydrostatics, measurements of flow, Bernoulli’s theorem and its application, flow through pipes, flow in open channels, weirs, flumes, spillways, pum ps and turbines
    • Irrigation Engineering: Definition, necessity, benefits, 211 effects of irrigation, types and methods of irrigation, Hydrology – Measurement of rainfall, run off coefficient, rain gauge, losses from precipitation – evaporation, infiltration, etc Water requirement of crops, duty, delta and base period, Kharif and Rabi Crops, Com mand area, Time factor, Crop ratio, Overlap allowance, Irrigation efficiencies Different type of canals, types of canal irrigation, loss of water in canals Canal lining – types and advantages Shallow and deep to wells, yield from a well Weir and barrage, Failure of weirs and permeable foundation, Slit and Scour, Kennedy’s theory of critical velocity Lacey’s theory of uniform flow Definition of flood, causes and effects, methods of flood control, water logging, preventive measure Land reclamation, Characteristics of affecting fertility of soils, purposes, methods, description of land and reclamation processes Major irrigation projects in India
    • Transportation Engineering: H ighway Engineering – cross sectional elements, geometric design, types of pavements, pavement materials – aggregates and bitumen, different tests, Design of flexible and rigid pavements – Water Bound Macadam (WBM) and Wet Mix Macadam (WMM), Gravel Road, Bituminous construction, Rigid pavement joint, pavement maintenance, Highway drainage, Railway Engineering­ Components of permanent way – sleepers, ballast, fixtures and fastening, track geometry, points and crossings, track junction, stations and yards Traffic E ngineering – Different traffic survey, speed-flow-density and their interrelationships, intersections and interchanges, traffic signals, traffic operation, traffic signs and markings, road safety
    • Environmental Engineering: Quality of water, source of water supply, purification of water, distribution of water, need of sanitation, sewerage systems, circular sewer, oval sewer, sewer appurtenances, sewage treatments Surface water drainage Solid waste management – types, effects, engineered management system Air pollution – pollutants, causes, effects, control Noise pollution – cause, health effects, control
    • Structural Engineering: Theory of structures: Elasticity constants, types of beams – determinate and indeterminate, bending moment and shear force diagrams of simply supported, cantilever and over hanging beams Moment of area and moment of inertia for recta ngular & circular sections, bending moment and shear stress for tee, channel and compound sections, chim neys, dams and retaining walls, eccentric loads, slope deflection of simply supported and cantilever beams, critical load and colum ns, Torsion of circular section
    • Concrete Technology: Properties, Advantages and uses of concrete, cement aggregates, importa nce of water quality, water cement ratio, workability, mix design, storage, batching, mixing, placement, compaction, finishing and curing of concrete, quality control of concrete, hot weather and cold weather concreting, repair and maintenance of concrete structures
    • RCC Design: RCC beams-flexural strength, shear strength, bond strength, design of singly reinforced and double reinforced beams, cantilever beams T-beams, lintels One way and two way slabs, isolated footings Reinforced brick works, colum ns, staircases, retaining wall, water tanks (RCC design questions may be based on both Limit State and Working Stress methods)
    • Steel Design: Steel design and construction of steel colum ns, beams roof trusses plate girders
  • Part-B (Electrical Engineering):

    • Basic concepts: Concepts of resistance, inductance, capacitance, and various factors affecting them Concepts of current, voltage, power, energy and their units
    • Circuit law: Kirchhoff’s law, Simple Circuit solution using network theorems
    • Magnetic Circuit: Concepts of flux, m mf, reluctance, Different kinds of magnetic materials, Magnetic calculations for conductors of different configuration e.g. straight, circular, solenoidal, etc Electromagnetic induction, self and mutual induction
    • AC Fundamentals: Instantaneous, peak, RMS and average values of alternating waves, Representation of sinusoidal wave form, simple series and parallel AC Circuits consisting of RL and C, Resonance, Tank Circuit Poly Phase system – star and delta connection, 3 phase power, DC and sinusoidal response of R-Land R-Ccircuit
    • Measurement and measuring instruments: Measurement of power (1 phase and 3 phase, both active and re-active) and energy, 2 wattmeter method of 3 phase power measurement, Measurement of frequency and phase angle Am meter and voltmeter (both moving oil and moving iron type), extension of range wattmeter, Multimeters, Megger, Energy meter AC Bridges Use of CRO, Signal Generator, CT, PT and their uses Earth Fault detection
    • Electrical Machines : (a) DC Machine – Construction, Basic Principles of DC motors and generators, their characteristics, speed control and starting of DC Motors Method of braking motor, Losses and efficiency of DC Machines (b) 1 phase and 3 phase transformers – Construction, Principles of operation, equivalent circuit, voltage regulation, OC and SC Tests, Losses and efficiency Effect of voltage, frequency and wave form on losses Parallel operation of 1 phase /3 phase transformers Auto transformers (c) 3 phase induction motors, rotating magnetic field, principle of operation, equivalent circuit, torque-speed characteristics, starting and speed control of 3 phase induction motors Methods of braking, effect of voltage and frequency variation on torque speed characteristics Fractional Kilowatt Motors and Single Phase Induction Motors: Characteristics and applications
    • Synchronous Machines – Generation of 3-phase emf armature reaction, voltage regulation, parallel operation of two alternators, synchronizing, control of active and reactive power Starting and applications of synchronous motors
    • Generation. Transmission and Distribution – Different types of power stations, Load factor, diversity factor, demand facto r, cost of generation, inter-connection of power stations Power factor improvement, various types of tariffs, types of faults, short circuit current for symmetrical faults Switchgears – rating of circuit breakers, Principles of arc extinction by oil and air, HRC Fuses, Protection against earth leakage / over current, etc Buchholtz relay, Merz-Price system of protection of generators & transformers, protection of feeders and bus bars Lightning arresters, various transmission and distribution system, comparison of conductor materials, efficiency of different system Cable – Different type of cables, cable rating and derating factor
    • Estimation and costing : Estimation of lighting scheme, electric installation of machines and relevant IE rules Earthing practices and IE Rules
    • Utilization of Electrical Energy : Illumination, Electric heating, Electric welding, Electroplating, Electric drives and motors
    • Basic Electronics : Working of various electronic devices e.g. P N Junction diodes, Transistors (NPN and PN P type), BJT and JFET Simple circuits using these devices
  • Part- C (Mechanical Engineering):

    • Theory of Machines and Machine Design: Concept of simple machine, Four bar linkage and link motion, Flywheels and fluctuation of energy, Power transmission by belts – V-belts and Flat belts, Clutches – Plate and Conical clutch, Gears – Type of gears, gear profile and gear ratio calculation, Governors Principles and classification, Riveted joint, Cams, Bearings, Friction in collars and pivots
    • Engineering Mechanics and Strength of Materials: Equilibrium of Forces, Law of motion, Friction, Concepts of stress and strain, Elastic limit and elastic constants, Bending moments and shear force diagram, Stress in composite bars, Torsion of circular shafts, Bucking of colum ns-Euler’s and Rankin’s theories, Thin walled pressure vessels
  • Thermal Engineering:

    • Properties of Pure Substances: p-v & P-T diagrams of pu re substance like Hz O, Introduction of steam table with respect to steam generation process; definition of saturation, wet & superheated status Definition of dryness fraction of steam, degree of superheat of steam H -s chart of steam (Mollier’s Chart)
    • 1st Law of Thermodynamics: Definition of stored energy & internal energy, 1st Law of Thermodynamics of cyclic p rocess, Non Flow Energy Equation, Flow Energy & Definition of Enthalpy, Conditions for Steady State Steady Flow; Steady State Steady Flow E nergy Equation
    • 2nd Law of Thermodynamics: Definition of Sink, Source Reservoir of Heat, Heat Engine, Heat Pum p & Refrigerator; Thermal Efficiency of Heat Engines & co-efficient of performance of Refrigerators, Kelvin – Planck & Clausius Statements of 2 nct Law of Thermodynamics, Absolute or Thermodynamic Scale of temperature, Clausius Integral, E ntropy, Entropy change calculation of ideal gas p rocesses Carnot Cycle & Carnot Efficiency, PMM-2; definition & its impossibility
    • Air standard Cycles for IC engines: Otto cycle; plot on P-V, T-S Planes; Thermal Efficiency, Diesel Cycle; Plot on P-V, T-S planes; Thermal efficiency.
    • IC Engine Performance, IC E ngine Combustion, I C E ngine Cooling & Lubrication
    • Rankine cycle of steam: Simple Rankine cycle plot on P-V, T-S, h-s planes, Rankine cycle efficiency with & without pum p work Boilers; Classification; Specification; Fittings & Accessories: Fire Tube & Water Tube Boilers Air Compressors & their cycles; Refrigeration cycles; Principle of a Refrigeration Plant; Nozzles & Steam Turbines
    • Fluid Mechanics & Machinery:
    • Properties & Classification of Fluid: ideal & real fluids, Newton’s law of viscosity, Newtonian and Non- Newtonian fluids, compressible and incompressible fluids
    • Fluid Statics: Pressu re at a point
    • Measurement of Fluid Pressure: Manometers, U-tube, Inclined tube
    • Fluid Kinematics: Stream line, laminar & turbulent flow, external & internal flow, continuity equation
    • Dynamics of ideal fluids: Bernoulli’s equation, Total head; Velocity head; Pressure head; Application of Bernoulli’s equitation
    • Measurement of Flow rate Basic Principles: Venturimeter, Pilot tube, Orifice meter
    • Hydraulic Turbines: Classifications, Principles
    • Centrifugal Pumps: Classifications, Principles,
  • Performance Production Engineering: 

    • Classification of Steels : mild steal & alloy steel, Heat treatment of steel, Welding – Arc Welding, Gas Welding, Resistance Welding, Special Welding Tech niques i.e. TIG, MIG, etc (Brazing & Soldering), Welding Defects & Testing; NDT, Foundry & Casting – methods, defects, different casting processes, Forging, Extrusion, etc, Metal cutting principles, cutting tools, Basic Principles of machining with (i) Lathe (ii) Milling (iii) D rilli ng (iv) Shaping (v) Grinding, Machines, tools & manufacturing processes.

SSC JE Eligibility Criteria – Physical, Medical Standard


  • Every recruit must be sufficiently intelligent, free from nervous instability and be in possession of sound He shall have no constitutional or acquired disability as may in the opinion of Recruiting Medical Officer render him unfit for duties, in the organization, particularly at high altitude and hard areas.

General examination

  • It is absolutely essential in all cases to have the recruits stripped while carrying out medical Due regard be paid to privacy and decency. It is not sufficient that the clothing be only partially removed. An underwear may be permitted except when the examination is being carried out involving private parts. Every part of the body must be examined and if a recruit does not submit to this even after persuasion, he will be rejected. Permanent body tattoos are only permitted on inner face of forearms i.e. from inside of elbow to the wrist and on the reverse side of palm/back (dorsal) side of hand. However, in case of an obscene, vulgar or objectionable tattoo, the DOG (Pers)/Comdt GREF Centre will take a final decision on acceptability/unacceptability of such tattoo. The decision of the DOG (Pers)/ Comdt GREF Centre in the matter shall be final. Permanent body tattoos on any other part of the body is not acceptable and candidate will be barred from further screening.

Responsibility for physical fitness

  •  The examining Medical Board is responsible for checking the physical fitness of the recruits, the likelihood of their physical development and for their identification marks. The Board will also enter on the enrolment form any minor defects insufficient to cause rejection. In the case of fit recruits the Board will make the necessary entry on the enrolment form, the wording used being Fit-category GREF-1 and return it to the enrolling officer. The signature of the examining Medical Officer on the enrolment form will be accepted as equivalent to a declaration that he has personally examined the recruit in question according to the existing instructions and that the recruit has no blemish or defect except those noted on the enrolment form. Remarks relating to any defects in the recruit will be endorsed in the medical examiner’s own handwriting. When there are no distinctive marks this must be stated.

Medical History Sheet GREF/MED/2A

 This is a document of great importance which is linked to claims for disability pension on soldier’s discharge from the service Medical items in table No 1 of GREF/MED/2A will be completed by the Medical Board GREF/MED/2A is placed at Annexure-1 to Schedule-Ill of Notification.

  • Any failure of officers concerned to give attention to the preparation and maintenance of these documents, and inaccuracy in or insufficiency of the entries therein may cause considerable delay, much expense and grave injustice to the person Medical Officers will , therefore, take every care to ensure that all necessary entries are carefully and accurately made at the time of examination.
  • Marks and small defects are to be noted concisely and clearly in the space allotted for the purpose in order to facilitate the men’s future Special attention should always be drawn to any defects which may influence decision on possible claims for pension in the future.

Nationality Eligibility Criteria for SSC JE

  • A candidate must be either:
    • a citizen of India, or
    • a subject of Nepal, or
    • a subject of Bhutan, or
  • a person of Indian ongm who has migrated from Pakistan, Burma, Sri Lanka, East African countries of Kenya, Uganda, the U nited Republic of Tanzania (formerly Tanganyika and Zanzibar), Zambia, Malawi, Zaire, Ethiopia and Vietnam with the intention of permanently setting in I
  • Provided that a candidate belonging to categories (b), (c) and (d) above shall be a person in whose favour a certificate of eligibility has been issued by the Government of I
  • A candidate in whose case a certificate of eligibility is necessary may be admitted to the examination but the offer of appointment will be given only after the necessary eligibility certificate has been issued to him (hereinafter may be read as ‘him/her’) by the Government of I

SSC JE Age Limit

SSC JE Age Limit: The crucial date for age reckoning is fixed as 1st August of year of exam in accordance with the provisions of DoP&T OM 14017/70/87-Estt.(RR) dated 14.07.1988.

For the posts for which age limit is upto 30 years
For the posts for which age limit is upto 32 ears

SSC JE Age Limit Relaxation

Allowed SSC JE Age Limit Relaxation: relaxation in upper age limit prescribed i n para 2 above is in accordance with the provisions of DoP&T OM 15012/2 / 2010- Estt.(D) dated 27.03.2012:

Code Category SSC JE Age Limit Relaxation permissible beyond the upper age limit
01 SC/ ST 5 years
02 OBC 3 years
03 PwD (Unreserved) 10 years
04 PwD (OBC) 13 years
05 PwD (SC/ST) 15 years
06 Ex-Servicemen (ESM) 3 years after deduction ofthe military service rendered from the actualage.
08 Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a conseq uence thereof. 3 years
09 Defence Personnel disabled in operation during hostilities with any foreign country or in a disturbed area and released as a conseq uence thereof (SC/ST). 8 years
  • Date of Birth filled by the candidate in the online application form and the same recorded in the Matriculation/Secondary Examination Certificate will be accepted by the Commission for determining the age and no subsequent request for change will be considered or granted and mismatch of date of birth will be a ground for rejection of candidature.
  • Ex-Servicemen (ESM) who have already secured employment in civil side under Central Government in Group ‘C’ & ‘D’ posts on regular basis after availing of the benefits of reservation given to ESM for their re­ employment are not eligible for reservation in ESM category and fee However, he/she can avail of the benefit of reservation as ex­ serviceman for subsequent employment if he/she immediately after joining civil employment, gives self-declaration/ undertaking to the concerned employer about the date-wise details of applications for various vacancies for which he/she had applied for befo re joining the initial civil employment as mentioned in the OM No. 36034/1/ 2 014-Estt (Res) dated 14th August 2014 issued by DoP&T.
  • The period of “Call up Service” of an Ex-Serviceman in the Armed Forces shall also be treated as service rendered in the Armed Forces for purpose of age relaxation, as per
  • For any serviceman of the three Armed Forces of the U nion to be treated as Ex-Serviceman for the purpose of securing the benefits of reservation, he/she must have already acquired, at the relevant time of submitting his application for the Post/Service the status of Ex­ Servicemen otherwise than by way of ‘dismissal or discharge on account of misconduct or inefficiency’ or be in a position to establish his acquired entitlement by documentary evidence from the competent authority that he/she would complete specified term of engagement from the Armed Forces within the stipulated period of one year from the closing date for receipt of Such candidates must also acquire the status of an Ex-Serviceman within the stipulated period of one year from the closing date of receipt of applications.


SSC JE Educational Qualifications

s. No. Organization Post

SSC JE Essential Educational Qualifications

Age limit
1 Border Roads Organization (BRO) J E (C)



J E (E & M)

Degree in Civil Engineering from a recognized University / Institute; or

(a) Three years Diploma in Civil Engineering from a recognized University / Institute/ Board; and

(b) Two years working experience in Planning/Execution/Maintenance of Civil Engineering works.

Degree in Electrical or Mechanical Engineering from a recognized University/Institute; or

(a) Three years Diploma in Electrical/ Automobile/Mecha nical Engineering from a recognized University/ Institute/ Board; and

(b) Two years’ experience in Planning/Execution/ Maintenance of Electrical or Mechanical Engineering works.


Upto 30 years

2 Central Public Works Department (CPWD) J E (C) Diploma in Civil Engineering from a recognized University or Institute. Upto 32 years
J E (E) Diploma in Electrical or Mechanical Engineering from a recognized University or Institute. Upto 32 years
3 Central Water Commission J E (C) Bachelor’s Degree or Diploma in Civil Engineering from a recognized University or Institution. Upto 30 years
J E (M) Bachelor’s Degree or Diploma in Mechanical Engineering from a recognized University or Institution Upto 30 years
4 Depa rtment of [Water Resources, River Development & Ganga Rejuvenation (Brahmaputra Board) J E (C) Three years Diploma in Civil Engineering from a recognized University or Institution. Upto 30 years


Farakka Barrage Project (FBP) J E (C) Diploma in Civil Engineering from a recognized University or Institute or Board. Upto 30 years
J E (M) Diploma in Mecha nical Engineering from a recognized University or Institute or Board. Upto 30 years


Military Engineer Services (MES) J E (C) Degree in Civil Engineering from a recognized University; or (a) Three years Diploma in Civil Engineering from a recognized Institute or University or Board; and b) Two years’ experience in Planning, Execution and Maintenance of Civil Engineering works. Upto 30 years
J E (E & M) Degree in Electrical or Mechanical Engineering from a recognized University; or (a) Three years diploma in Electrical or Mecha nical Engineering from a recognized Institute or University or Board; and (b) Two years’ experience in Planning, Execution and Maintenance of Electrical or Mecha nical Engineering Works Upto 30 years



Ministry of Ports, Shipping & Waterways (Andaman Lakshadweep Harbour Works) J E (C) Diploma in Civil Engineering from a recognized Institution. Upto 30 years
J E (M) Diploma in Mecha nical Engineering from a recognized Institution. Upto 30 years
8 National Technical Research Organization (NTRO) J E(C) Diploma in Civil Engineering from a recognized University / Institution. Upto 30 years
J E (E) Diploma in Electrical Engineering from a recognized Universitv /Institution. Upto 30 years
J E (M) Diploma in Mecha nical Engineering from a recognized Universitv /Institution. Upto 30 years

SSC JE How to apply

  • Applications must be submitted only in online mode at the officialwebsite of SSC Headquarters; e., https: // For detailed instructions, please refer to Annexure-111 and Annexure-IV of this Notice. Sample proforma of One-time Registration and online Application Forms are attached as Annexure- IIIA and Annexure- IVA.
  • In the online Application Form, candidates are required to upload the scanned colour passport size photograph in JPEG/J PG format (20 KB to 50 KB). Image dimension of the photograph should be about 3.5 cm (width) x 4.5 cm (height). I n compliance of the Order dated 05.03.2 020 of Hon’ble Supreme Court in the matter of Shantanu Ku mar & Ors. [Writ Petition (C) No.234 of 2018], the photograph of the candidate should not be more than three months old from the date of publication of notice of the examination. The Photograph should be without cap and spectacles. The frontal view of the face should be clearly visible.
  • Before submitting the Application Form, candidate must ensure that the photograph is uploaded as per the given If the photograph is not uploaded by the candidate in the desired format, his application/ candidature will be rejected or cancelled. Specimen of photographs delineating photograph acceptable/photograph not acceptable is also given at Annexure-XV.
  • Scanned signature in JPEG/J PG format (10 to 20 KB). Image dimension of the signature should be about 0 cm (width) x 2.0 cm (height). Applications with blu rred signature will be rejected.
  • Candidates are advised in their own interest to submit online applications much before the closing date and not to wait till the last date to avoid the possibility of disconnection/ inability or failure to login to the SSC website on account of heavy load on the website during the closing
  • The Commission will not be responsible for the candidates not being able to submit their applications within the last date on account of the aforesaid reasons or for any other reason beyond the control
  • Before submission of the online application, candidates must check through Preview/ Print option that they have filled correct details in each field of the applicatio

SSC JE Application Fee

  • Fee payable: Rs 100/- (Rs one hundred only).
  • Women candidates and candidates belonging to Scheduled Castes (SC), Scheduled Tribes (ST), Persons with Benchmark disabilities (PwBD) and Ex-Servicemen eligible for reservation are exempted from payment of
  • Fee can be paid only through online payment modes, namely BHI M U PI, Net Banking, or by using Visa, MasterCard, Maestro, or RuPay Credit or Debit
  • Candidates must ensure that their online payment has been successfully made to If the fee is not received by SSC, status of Application Form is shown as ‘Incomplete’ and this information is printed on the top of the Application Form. Further, status of fee payment can be verified at the ‘Payment Status” link provided in the candidate’s login screen. Such applications which remain incomplete due to non-receipt of fee will be SUMMARI LY REJ ECTED and no request for consideration of such applications and fee payment after the period specified in the Notice of Examination shall be entertained.
  • Fee once paid shall not be refunded under any circumstances nor will it be adjusted against any other examination or

SSC JE Centre of Exam

S No Examination Centres and Centre Code

** SSC Region and States/ UTs under the jurisdiction of the Region **

Address of the Regional Offices and their websites

1 Bhagalpur(3201), Muzaffarpur(3205), Patna(3206), Purnea (3209), Agra(3001), Bareilly (3005), Gorakhpur (3007), Jhansi (3008), Kanpur(3009), Lucknow(3010), Meerut(3011), Prayagraj(3003), Varanasi(3013)

** Central Region (CR)/ Bihar and Uttar Pradesh **

Regional Director (CR), Staff Selection Commission, 34-A, Mahatma Gandhi Marg, Civil Lines, Kendriya Sadan, Prayagraj – 211001. (

2 Port Blair (4802), Dhanbad (4206), Jamshedpur(4207), Ranchi(4205), Balasore(Odisha) (4601), Berhampore(Odisha) (4602), Bhubaneswar(4604), Cuttack(4605), Rourkela(4610), Sambalpur(4609), Gangtok(4001), Asansol(4417), Burdwan (4404), Durgapur (4426), Kalyani(4419), Kolkata(4410), Siliguri(4415)

** Eastern Region (ER)/ Andaman & Nicobar Islands, Jharkhand, Odisha, Sikkim and West Bengal **

Regional Director (ER), Staff Selection Commission, 1st MSO Building, (8th Floor), 234/4, Acharya Jagadish Chandra Bose Road, Kolkata, West Bengal-700020 (

3 Belagavi (9002), Bengaluru (9001), Hubballi (9011), Kalaburagi (Gulbarga) (9005), Mangaluru (9008), Mysuru (9009), Shivamogga (9010), Udupi (9012). Ernakulam (9213), Kollam (9210), Kottayam (9205), Kozhikode (9206), Thrissur (9212), Thiruvananthapuram (9211).

** Karnataka, Kerala Region (KKR)/ Lakshadweep, Karnataka and Kerala **

Regional Director (KKR), Staff Selection Commission, 1st Floor, “E” Wing, Kendriya Sadan, Koramangala, Bengaluru, Karnataka-560034 (

4 Bhopal (6001), Gwalior(6005), Indore (6006), Jabalpur (6007), Satna (6014), Sagar (6015), Ujjain (6016), Bilaspur (6202), Raipur (6204), Durg-Bhilai (6205)

** Madhya Pradesh Sub-Region (MPR)/ Chhattisgarh and Madhya Pradesh **

Regional Director (MPR), Staff Selection Commission, 5th Floor, Investment Building, LIC Campus-2, Pandri, Raipur, Chhattisgarh- 492004 (

5 Itanagar(5001), Dibrugarh(5102), Guwahati(Dispur)(5105), Jorhat(5107), Silchar(5111), Tezpur (5112), Churachandpur(5502), Imphal(5501), Ukhrul(5503), Shillong(5401), Aizwal(5701), Dimapur (5301), Kohima(5302), Agartala(5601),

** North Eastern Region (NER)/ Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland and Tripura. **

Regional Director (NER), Staff Selection Commission, Housefed Complex, Last Gate, Beltola-Basistha Road, P.O. Assam Sachivalaya, Dispur, Guwahati, Assam-781006 (

6 Dehradun(2002), Haldwani(2003), Roorkee(2006), Delhi(2201), Ajmer(2401), Bikaner(2404), Jaipur(2405), Jodhpur(2406), Udaipur(2409), Sikar(2411)

** Northern Region (NR)/ Delhi, Rajasthan and Uttarakhand **

Regional Director (NR), Staff Selection Commission, Block No. 12, CGO Complex, Lodhi Road, New Delhi-110003 (

7 Chandigarh/ Mohali(1601), Hamirpur(1202), Shimla(1203), Jammu(1004), Samba(1010), Srinagar(J&K)(1007), Leh(1005), Amritsar(1404), Jalandhar(1402), Patiala(1403),

** North Western Sub-Region (NWR)/ Chandigarh, Haryana, Himachal Pradesh, Jammu and Kashmir, Ladakh and Punjab

Regional Director (NWR), Staff Selection Commission, Block No. 3, Ground Floor, Kendriya Sadan, Sector-9, Chandigarh-160009 (

8 Chirala(8011), Guntur(8001), Kakinada (8009), Kurnool(8003), Nellore (8010), Rajahmundry(8004), Tirupati(8006), Vizianagaram(8012), Vijayawada(8008), Vishakhapatnam(8007), Puducherry(8401), Chennai(8201), Coimbatore(8202), Madurai(8204), Salem(8205), Tiruchirapalli(8206), Tirunelveli(8207), Vellore (8208), Hyderabad(8601), Karimnagar (8604), Warangal(8603)

Southern Region (SR)/ Andhra Pradesh, Puducherry, Tamil Nadu and Telangana. **

Regional Director (SR), Staff Selection Commission, 2nd Floor, EVK Sampath Building, DPI Campus, College Road, Chennai, Tamil Nadu-600006 (

9 Panaji(7801 ), Ahmedabad(7001 ), Gandhinagar(7012), Mehsana(7013), Rajkot(7006), Surat(7007), Vadodara(7002), Amravati(7201 ), Aurangabad(7202), Jalgaon(7214), Kolhapur(7203), Mumbai(7204), Nagpur(7205), Nanded (7206), Nashik(7207), Pune(7208)

Western Region (WR)/ Dadra and Nagar Haveli and Daman and Diu, Goa, Gujarat and Maharashtra

Regional Director (WR), Staff Selection Commission, 1st Floor, South Wing, Pratishtha Bhawan, 101, Maharshi Karve Road, Mumbai, Maharashtra-400020 (}

SSC JE Pay Level, Pay Scale

SSC JE Pay Level, Pay Scale: HQ-PPII03(2)/1/2023-PP_II: Staff Selection Commission will hold an open competitive examination for recruitment to the posts of Junior Engineer (Civil, Mechanical & Electrical) for Organizations/Offices of the Government of India. The posts are of Group ‘B’ (Non-Gazetted), Non-Ministerial in Level 6 (Rs 35400-112400/-) of pay matrix of 7th Central Pay Commission.

SSC JE Exam Pattern

SSC JE Exam Pattern: The Computer Based Examination will be conducted in two papers as indicated below:

  • Paper 1 SSC JE Exam Pattern
  • Paper 2 SSC JE Exam Pattern
Papers Mode of Examination Subject No of Questions/ Max. Marks Duration

Paper 1 SSC JE Exam Pattern

Computer Based Examination (i) General Intelligence and Reasoning 50/50 2 Hours

(2 hours and 40 minutes for the candidates who are eligible for scribe as per Para-9.1, 9.2 and 9.3)

(ii) General Awareness 50/50
(iii) Part-A: General E ngineering (Civil & Structural) or Part-B: General Engineering (Electrical) or Part-C: General Engineering (Mechanical)  


Paper 2 SSC JE Exam Pattern

Computer Based Examination Part-A: General Engineering (Civil & Structural)

or Part-B: General Engineering (Electrical) or

Part-C: General Engineering (Mechanical)



2 Hours

(2 hours and 40 minutes for the candidates who are eligible for scribe as per Para-9.1, 9.2 and 9.3)

  • The candidates will be required to attempt the General Engineering part (i.e. Part-A, Part-B or Part-C) in Paper 1 and Paper 2, which has been selected by them, on the basis of their Educational Qualification, in the online application In other words, the candidates appearing for the post of Junior E ngineer (Civil) are required to attempt Part-A (Civil & Structural) of Paper 1 and Paper 2 and the candidates appearing for the post of Junior E ngineer (Electrical) are required to attempt Part-B (Electrical) and the candidates appearing for the post of Junior Engineer (Mechanical) are required to attempt Part-C (Mechanical) of Paper 1 and Paper 2 failing which theircandidature will be rejected.
  • The Paper 1 & Paper 2 will consist of Objective Type, Multiple choice questions The questions will be set both in H ind i & E nglish.
  • Questions in both papers will be of Objective Multiple Choice Questions will be set in H indi and English in Parts-I, II and III of Paper 1 and Paper 2. There will be negative marking equal to one-third of the marks allotted to the question for each wrong answer in Paper 1 & Paper 2. Candidates are, therefore, advised to keep this in mind while answering the questions.
  • Candidates are allowed to bring their own Slide-Rule, Calculator, Logarithm Table and Steam Table for Paper 2 They are not allowed for using such aids for Paper 1.
  • Tentative Answer Keys of Paper 1 and Paper 2 will be placed on the website of the Com mission after the Candidates may go through the Answer Keys and submit online representations, if any, within the time limit given by the Com mission, on payment of Rs. 100/­ per question which is non-refundable. Rep resentations on the matter received through any other modalities; i.e., letter, application, email, etc. will not be entertained.
  • Marks scored by candidates in Computer Based Exam ination, if conducted in multiple shifts, will be normalized by using the formula published by the Com mission through Notice No: 1-1/ 2018-P&P-I dated 07-0 2-2019 and such normalized scores will be used to determine final merit and cut-off
  • The dates of examinations indicated in the Notice are Any change in the schedule of examinations will be informed to candidates only through the website of the Com mission.
  • There shall be no provision for re-evaluation/ re-checking of scores of any stage/ paper(s) of the No correspondence in this regard shall be entertained.

Leave a Reply Cancel reply

Exit mobile version